How to debug optical screening machine?

With the rapid development trend of Chinese processing industry, parts and accessories increasingly tend to be high precision and practical, so the regulations on product quality in the sales market are also increasingly improved, relying on manual service inspection seems stupid. Therefore, it becomes a rigid demand to replace manual service inspection with accurate and fast automated optical inspection equipment.

As everyone knows, in recent years, optical automatic screening machine manufacturers like mushrooming, the enterprises of commodity technology and service projects are different, each screen machine is less than one hundred thousand, hundreds of thousands, and even higher. So how should the optical screening machine be adjusted?

How to debug optical screening machine:

1. Before the test, it is necessary to turn the shaker by hand, turn the hand to induction flexible, no noise and other anomalies, no jamming phenomenon, before officially starting the machine;

2. After the no-load test is qualified, it can be put into load test, and the load test time can be carried out according to the requirements of process test;

3, vibrating screen driving direction positioning, feed port, facing the direction of material flow to observe the motor position, get up and down, before and after driving;

4. After the installation and adjustment, the no-load test run should be less than 2H, which requires smooth operation, no abnormal or noise, amplitude and movement track meet the requirements;

5, the spring must be in a vertical state, the spring support and spring contact surface must be in a horizontal state, precision screw selection machine quotation, adjusted with bolts on the spring support fixed in the screen frame.

The above content is the introduction of how to debug the optical screening machine, the use of optical screening machine in the enterprise is very wide, because it can greatly improve the work efficiency, reduce labor costs.