Can optical screening equipment detect multiple products at the same time?

Can visual defect detection equipment test multiple products? Visual inspection equipment manufacturers tell you that most of the time, a device can not be suitable for multiple products at the same time.

The program and software and configuration of an equipment have been set up, such as the detection of the sealing ring, the customer requires the detection of appearance, size, diameter, etc., similar models of products can be detected, but if the customer needs to detect the large sealing ring, the detection requirements and content are more, the equipment can not meet this thing.

In fact, many processing plants have already completed the transformation to automation technology development, the application of new machine vision technology to carry out IQC for the appearance of products, it can replace the traditional human quality inspection, complete the product appearance line efficient automation technology inspection. According to the machine, the automatic retrieval of product surface defects can be carried out independently, and the inspection rate can be the same stage in the automatic production line. The appearance of the products produced by the company is one of the most important factors of product quality. Whether the products are smooth or have defects or not is not only related to the sensory enjoyment of the products, but also affects the application and post-production processing of the products themselves.

Introduction of visual defect detection equipment:

When the light shines on the product surface with a variety of defects, a variety of defects and defects will show different anomalies from the surrounding in the reflection surface, mapping and other levels. For example, when symmetrical light is irradiated vertically on the surface of the product, if there is no defect on the surface of the product, the irradiated part is not easy to change, and the detected light is also symmetrical; When the surface of the product has a defect, the light exposure will change and the detected image will change.

Because of the existence of the defect, the stress and deformation occur around it, which is also very easy to see in the image. In case of light scattering defects (such as cracks, bubbles, etc.), light will be mapped in the defect area, and the intensity of light is larger than that of the surrounding area, so the light detected by the camera target surface is relatively improved. If you encounter light-absorbing particles (such as sand particles), the light at the defect site will be reduced, and the light detected on the surface of the camera target will be weaker than the light around it. The relative defect information content can be obtained by analyzing the elevation change and image characteristics of the image data signal collected by the camera.

Visual defect detection equipment

1. Complete partial full inspection under maximum efficiency; 2. Digital camera and solution technology can quickly detect, classify, display information and remove defects; 3. High-quality electron-optical configuration is used for defect inspection of urgent shortage, and even defects of low saturation; 4, intelligent classification of mobile phone software: defects are accurately classified into each file directory according to the source; 5, the actual operation is simple and convenient, do not need to strengthen learning can defect monitoring system; 6. Information content is accurate, immediate and reliable.

Visual defect detection equipment can not only detect the appearance size of the product, but also detect the pipeline, realizing the detection of labels, bar codes, etc.