Release time：2023-03-22 09:39:56 Viewed：0
Early in the 1990s, our machine vision technology began to develop, in this era of industrial development of automation, the use of machine vision technology in the future trend, the great popularity of machine vision technology, indicating the future era of automation, these additional information can point out which products are good, which is bad, or show where the shortcomings are located, And even products that have changed their designs can be quickly identified. In any case, machine vision can match or even surpass the visual detection capabilities of our eyes and brains.
An effective visual system helps you improve efficiency and performance by eliminating defects, verifying assembly, and tracking and collecting information at every stage of the production process. Therefore, after processing is complete, the nuts need to be inspected to pick out non-conforming products. This is usually done manually and automatically testing the line brand. It is time-consuming and laborious to test the thread of nut one by one with thread tap, and it directly increases the production cost of the enterprise by automatically testing the production line plant.
At this time, we need to use O-ring visual inspection equipment, which can detect the appearance and size defects of the sealing ring in all aspects. In the face of such complex detection requirements, if we only rely on manual detection, the effect and efficiency of detection can not adapt to the higher and higher quality requirements and more and more expensive labor costs, and the machine vision system match, Visual accuracy measurement is also related to vi system, and visual identification system online monitoring is a key application of visual accuracy measurement in machine vision system.
The cost of trial and error is high, and the debugging cycle is long, which leads to the chip development is a high threshold industry, and the general enterprises will not easily invest in it. The program verification is a process full of uncertainty. The convenience of single adjustment of camera light source erection and pose adjustment has a great impact on the verification cycle of the overall program. Inspect finished products for defects, contaminants, functional defects and other nonconformities, and eliminate them to ensure the quality of each product.
The visual inspection system of automobile parts determines whether the product meets the requirements by identifying the image features of the stamping parts, analyzing and calculating the characteristic information of the stamping parts and the output control signal. In the machine vision inspection machine equipment, the key is the machine vision light source, and the machine vision light source is the lamp source control board. In the machine vision system, The backlight is a very key structure that determines the actual effect of the machine vision system to collect images and solve images. Many aspects of automobile manufacturing are now equipped with automatic operation, without manual operation. However, in order to ensure the quality of each component, Need a very reliable technology to check the use of machine vision machine to detect product errors than artificial to save, the use of artificial detection not only reduces the efficiency of industrial production and production automation, will also reduce the accuracy of production, making the work more complex, and machine vision detection will be artificial detection of the ugly points are improved.
